ชุดดิสน้ำมัน SHIMANO DEORE M6000 J-KIT

ชุดดิสน้ำมัน SHIMANO DEORE M6000 J-KIT พร้อมอุปกรณ์ครบชุด ไล่น้ำมันเสร็จจากโรงงานพร้อมใช้ ก้ามเบลคมีปีกระบายความร้อน ไม่รวมใบ ของใหม่

Specifications:

Series: Deore M6000
Application: Trail, All Mountain, Cross Country
Type: hydraulic, 2 pistons
Brake Actuation: mineral oil
Hose: SM-BH90-SS
Hose Length: 1000 mm/1700 mm
 

Technical Information - Caliper:
Mount: post mount
Pistons: 2
Pads: G02S resin
Design: 2-piece
Material: aluminium
Connection: straight
 

Technical Information - Brake Lever:

Lever Length: 2-finger
Adjustment Options: reach adjust (tool)
Mount: clamp (split), I-Spec II
Design: right side (only), left side (only)
Brake Lever Material: aluminium
Lever Body Material: aluminium
Connection: straight
 

Features:

- powerful and responsive braking for a wide range of riding styles
- curable construction with a cool integrated appearance
- smooth and predictable control with balance of power and rigidity
- Servo Wave-, One Way Bleeding- and Ice Tech-Technology
- I-Spec II compatible
- funnel bleeding
- lever anodized, stainless steel clamp bolt
- resin pistons 
- IS mount with mount adapter
- caliper painted, steel caliper fixing bolt (5 mm)
- recommended rotors: SM-RT64, SM-RT66, SM-RT54, SM-RT56
 

Technology:

Servo Wave
When you pull a servo wave brake lever initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control.

I-Spec II
The Deore M6000 levers are fit with the new I-Spec II system. This system combines the shifter and brake lever into one clamp that can be mounted on the handlebars. I-Spec II gives more freedom in cockpit placement, saves weight, and more mounting possibilities for a more ergonomic design. Easily installed with smaller clamps leaving more space on the handlebars. Maximum adjustment parameters: vertical 15°, horizontal 12 mm. I-Spec II brakes are not compatible with I-Spec or I-Spec B shifters.

One Way Bleeding
One way bleeding was developed for quick and easy prevention of air in Shimano’s hydraulic system. Shimano has streamlined the oil route throughout the system to prevent air bubble from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system.

Ice-Tech
The fade, which can occur to rotor and pad when braking on a long downhill ride for instance, has a negative impact on the braking performance. Shimano has adopted Ice Technology rotors and Ice Technology pads to realize the cooling technology for consistent performance. The rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400 °C to 300°C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the rotor blade and the radiator fin provide long pad life, less noise, less fade and are lightweight.
 

Factory Number:

E-M6000KLFPRA100 + E-M6000KRRXRA170
 

Contents:

- 2 x Shimano Deore BR-M6000 + BL-M6000 disc brake, front and rear
- 1 x Shimano SM-BH90-SS brake hose 1000 mm (front) 
- 1 x Shimano SM-BH90-SS brake hose 1700 mm (rear)
- 2 pairs of Shimano G02S brake pads
- 2 x insert pin
- 2 x olive
- 4 x caliper bolts
- 2 x bleed block
- 2 x Shimano TL-BH61 assembly tool, 2-parts
- 2 x spring
- rotor not included
- adapter not included
- mount ready (filled and bled) 

PRODUCT SPECS